deposited metal
英 [dɪˈpɒzɪtɪd ˈmetl]
美 [dɪˈpɑːzɪtɪd ˈmetl]
溶敷（沉积，电积）金属；堆焊金属；电（喷）镀层（金属）
双语例句
- The results show that the tempering temperature of welding metals affects the microstructure, the hard phase types, performance and distribution of deposited metal.
结果表明：回火温度不仅对熔敷金属的显微组织有影响，而且对硬质相的类型、性能及分布等也有影响； - The analyses on microstructure of deposited metals were made, and the effect of alloy elements on the microstructure of deposited metal was discussed.
对获得的不同堆焊金属的显微组织进行了分析，并讨论了合金元素对堆焊层金属显微组织的影响。 - By adding magnesium powder into the coating of electrode, the sulphurs removal in deposited metal was satisfactory.
通过理论分析及实验，探讨了手工电弧焊焊条药皮中添加金属镁粉的脱硫效果。 - In this paper, the oxidation behavior of deposited metal for new Ni-base flux-cored wire in air at the temperature of800 ℃ and1000 ℃ was studied by using the oxidation weight increasing method.
采用增重法测定了自制新型镍基药芯焊丝熔敷金属在800℃和1000℃空气中的高温氧化行为。 - Dissolve deposited metal has low hardness and high toughness, heat corrosion resistance to impact abrasion.
溶敷金属具有低硬度高韧性，可耐热耐腐蚀耐冲击磨耗。 - The forecast and control of the amount of diffusion hydrogen in the deposited metal of basic electrodes
碱性焊条熔敷金属中扩散氢的予报及控制 - The results show that cobalt-based dies deposited metal has especially significant impact strengthening under high temperature impact.
试验结果表明：钴基模具堆焊金属具有较显著的冲击强化效果，尤其是高温冲击强化效果。 - Content of nitrogen and property of deposited metal of self-shielded fluxed-cored wires
氮强化自保护药芯焊丝氮含量及性能分析 - In this paper, using alkanethiol self_assembled monolayers ( SAMs) on gold as model interface, the behavior of deposited metal on SAMs surface and the interaction mechanism were analyzed.
本文介绍了金属原子在烷基硫醇自组装单分子膜表面的再沉积行为，从理论上分析了其作用机理，归纳出了金属在自组装单层膜表面的再沉积规律。 - Deposited metal can meet high welding quality and corrosion resistance.
熔敷金属能满足较高的焊接质量和耐腐蚀性能。 - Influence of Lanthanum and Yttrium on Low Carbon Steel Electrode Deposited Metal
镧、钇元素对低碳钢焊条熔敷金属影响的研究 - High-temperature Oxidation Behavior of Deposited Metal for New Ni-base Flux-cored Wire
新型镍基药芯焊丝熔敷金属的高温氧化行为 - Because of the influence of dilution of base metal and carbide precipitation of deposited metal, the hardness of deposited metal decreases with the increase of the tempering temperature.
由于母材稀释的影响和熔敷金属组织中的合金碳化物析出，熔敷金属的硬度随回火温度的升高而降低。 - The different tempering temperature was used on the sample, the influences of heat treatment temperature on microstructure and micro-hardness of deposited metal were analyzed and discussed.
采用不同的热处理温度对试样进行回火热处理，分析和讨论了热处理温度对熔敷金属显微组织和显微硬度的影响。 - Influence of Heat Treatment Temperature on Microstructure and Micro-hardness of Deposited Metal
热处理温度对熔敷金属组织及其硬度的影响 - Difference of impact absorbed energy between butt weld metal and deposited metal
对接焊缝金属和熔敷金属冲击吸收功差异的探讨 - The microstructure and porosity of the deposited metal can be systematically manipulated by the use of osmotic pressure.
利用渗透压的新技术可控制膜的微观结构和孔隙率。 - Microstructure and Mechanical Property of Deposited Metal of Low-alloy Wear-resistance Steel Electrode with RE
稀土低合金耐磨钢焊条熔敷金属的组织和力学性能 - The alloy elements such as Mo, V have distinct effect on the deposited metal grain refinement.
合金元素钼、钒对堆焊金属晶粒的细化作用效果明显。 - The microstructure of the deposited metal and the morphology of the fretting wear trace are studied.
分析了堆焊熔敷金属的显微组织，研究了微动摩擦试验结果。 - Influence of Environmental Conditions on Hydrogen Diffusion in Deposited Metal
环境条件对熔敷金属中扩散氢含量的影响 - Qualitative and quantitative analysis between deposited metal performances and alloying element factors in flux-cored wires are also discussed.
并利用所建模型，对堆敷金属性能与因子间的相关性进行了定性和定量分析。 - The influences of Mn on Fe phase aspect in casting metal and deposited metal are studied.
研究了Mn对铸态金属和氩弧熔敷金属中Fe相形态的影响。 - BaF_2 has more powerful capability than CaF_2 to control the P and Si in the deposited metal. The controlling mechanism is explained by thermodynamics analysis.
BaF2比CaF2控制熔敷金属中P、Si含量的能力更强，并通过热力学分析解释了氟化物对熔敷金属中P、Si控制的机理。 - Submerged arc welding with the test welding wire matching sintered flux was carried out to get the deposited metal.
对所研制的焊丝匹配烧结焊剂进行了熔敷金属的埋弧焊试验。 - Effect of Rare Earth Elements on Deposited Metal of Austenitic Stainless Steel Electrode
稀土元素对奥氏体不锈钢焊条熔敷金属组织和性能的影响 - The amount of the substrate metal molten will affect the fretting wear characteristics of the deposited metal.
基体金属在堆焊过程中熔化的数量将影响堆焊层金属的微动磨损特性。 - The effect of the substrate metal on the deposited metal property can be characterized by penetration ratio.
基体金属对堆焊层金属性能的影响可用参数熔合比来表征。 - Finally, we deposited metal on silica arrays partially modified with silver nanoparticles via the controllable deposition.
最后利用物理的可控沉积，在银纳米粒子/二氧化硅不对称粒子阵列上沉积金属。